Upgrading; Procedure - Ricoh Gestetner LANIER SAVIN G071 Service Manual

Rev. 04/2003

5.5.2 UPGRADING

Procedure

1. Turn the main switch off.
2. IC card cover [A] (
3. Insert the IC card [B].
4. Open the front cover and turn the main
switch on. The message on the right
appears on the operation panel.
5. Press the enter key.
6. Press the down arrow key.
7. Press the enter key.
8. Wait until the message on the right appears
on the operation panel.
9. Turn the main switch off.
10. Remove the IC card.
11. If upgrading two or more software modules, insert the next IC card and repeat
the steps above.
12. Put back the IC card cover.
13. Turn the main switch on.
SM
CÓPIA NÃO CONTROLADA
x 2)
5-57
CÓPIA NÃO CONTROLADA
UPGRADING SOFTWARE
[A]
[B]
IC-card face
Engine
Engine
*
Update Data
Updating...
******************
Updated
Power Off On
G070R721.WMF
G070S511.WMF
G070S512.WMF
G070S513.WMF
G070S514.WMF
G070S515.WMF
G071