Ricoh Gestetner LANIER SAVIN G071 Service Manual page 141

Rev. 04/2003
Mode No.
7
(Class 1, 2, and 3)
807 SC/Jam Clear
1 SC/Jam Clear
808 Counter Clear
1 Counter Clear
816 Tray Clear
1 Tray1
2 Tray2
3 Tray3
5 BypassTray
6 Duplex
819 OilCntRst
1 OilCntRst
825 Counter Reset
1 Counter Reset
832* Diag. Result
1 Diag. Result
833 Covrage
1 Last:M
2 Last:C
3 Last:Y
4 Last:Bk
5 Average: M
6 Average: C
7 Average: Y
8 Average: Bk
834 TnrConsume
1 M
2 C
3 Y
4 Bk
SM
CÓPIA NÃO CONTROLADA
Clears the counters related to SC codes and paper
jams.
[0 ~ 1 / 0 / 0 /step]
Clears all counters except for SP7-003 and –007.
[0 ~ 1 / 0 / 0 /step]
Clears the tray counters (SP7-204).
[0 ~ 1 / 0 / 0 /step]
Resets the oil counter values to "0."
[0 ~ 1 / 0 / 0 /step]
• 0: Does not clear
• 1: Clears
Resets the total counter values to "0."
[0 ~ 0 / 0 / 0 /step]
Displays the result of the diagnostics. Refer to section
4.2 for the error codes.
[0 ~ 0 / 0 / 0 /step]
Displays coverage ratios.
[0.00 ~ 100.0 / 0.00 / 0.01 %step]
This SP mode displays the "coverage ratio" of the
output, i.e. the ratio of the total pixel area of the
image data to the total printable area on the paper.
Do not use this counter for billing purposes. This is
because this value is not directly proportional to the
amount of toner consumed, although of course
it is one factor that affects this amount. The other major
factors involved include: the type, total image
area and image density of the original, toner
concentration and developer potential.
Last: This is the coverage for the previous sheet.
Average: This is the average coverage for each sheet.
Displays the coverage ratios, including toner
revitalization mode.
[0 ~ 9999999 / 0 / 1 /step]
This displays the average coverage ratio, including toner
consumed during printing and toner consumed during
toner revitalization mode (SP3-971).
Do not use this counter for billing purposes
5-43
CÓPIA NÃO CONTROLADA
SP MODE TABLES
Function / [ Setting ]
G071