Ricoh Gestetner LANIER SAVIN G071 Service Manual page 112

SP MODE TABLES
1
(Class 1, 2, and 3)
902* 3 A4/LT
4 B5/Executive
⇒
905 1 Pressure Roller Type
910 Empty Rev
⇒
920 Paper Feed Motor Delay Timing
1 Tray: Plain
2 By-pass: Plain
3 Tray: Small Size
G071
CÓPIA NÃO CONTROLADA
Mode No.
Specifies how the machine interprets the paper size
sensor output for the main unit tray.
[0 ~ 1 / 0 / 1/step]
• For Europe:
• For N. America:
Specifies how the machine interprets the paper size
sensor output for the main unit tray.
[0 ~ 1 / 0 / 1/step]
• For Europe:
• For N. America:
Specifies the settings for when fusing idling is done after
printing on A4/LT LEF or smaller paper sizes.
[0 ~ 2 / 0 / 1/step]
• After printing on small-width paper (A4 LEF/LT LEF or
• 0 (Int): Enables printing during fusing idling.
• 1 (NoRev): Disables this type of fusing idling.
• 2 (NoInt): Disables printing during fusing idling.
Adjust the timing of the paper feed motor when the
registration roller feeds the paper by the fusing motor.
This adjusts the paper buckle at the registration by the
start timing of the paper feed motor. Normally, the paper
buckle is adjusted by SP1-003. It is not necessary to
adjust in the field. (The copier version has clutch to
control the timing. This adjustment is only for printer
model.)
[0 ~ 50 / 15 / 5/step] DFU
[0 ~ 50 / 0 / 5/step] DFU
(Small size: A4/LT or narrower)
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
0: A4 SEF, 1: LT SEF
0: LT SEF, 1: A4 SEF
0: B5 SEF, 1: Executive (10.5" x 7.25") SEF
0: B5 SEF, 1: Executive (10.5" x 7.25") SEF
0: New Pressure Roller Type (2.1mm)
1: Old Pressure Roller Type (1.5mm)
The New Pressure Roller (2.1mm) has been applied
from first mass production of the machine.
smaller), fusing idling evens the oil thickness on the
roller surface.
5-14
Rev. 04/2003
SM