Ricoh Gestetner LANIER SAVIN G071 Service Manual page 132

SP MODE TABLES
Mode No.
5
(Class 1, 2, and 3)
811 MachineSerial
2 Display
812* FAX TEL No.
2 FAX TEL No.
813* HV_SC_Sens
1 HV_SC_Sens
814* Jam_OFF/ON
1 Jam_OFF/ON
816* RMS Setting
1 RMS Setting
828 Network
66 HD job Clear
67 JobSpool(LPR)
68 JopSpool(IPP)
832 HDD Init
1 HDD Init.
G071
CÓPIA NÃO CONTROLADA
Displays the machine serial number.
[0 ~ 1 / 0 / 1/step]
Sets the fax or telephone number for a service
representative by using the enter key and the down
arrow key.
[0 ~ 0 / 0 / 0/step]
• Both numbers and alphabetic characters can be input.
Activates/deactivates detection of SC conditions for the
high voltage power supplies.
[0 ~ 1 / 0 / 1/step]
• 0: Activated
• 1: Deactivated
• The following SCs are affected: SC300, 301, 302,
350, 351, 400, 410, 411, 412, 413, 420, 421, 430
Activates/deactivates jam detection.
[0 ~ 1 / 0 / 1/step]
• 0: Jam sensor activated
• 1: Jam sensor deactivated
Enables/disables the RMS function. DFU
[0 ~ 1 / 0 / 1/step]
• 0: Disable
• 1: Enable
Clears/prints the jobs spooled on the HDD (before the
main power was turned off) after initialization.
[0 ∼ 1 / 0 / 1 /step]
• 0: Clears
• 1: Prints
Spools/does not spool jobs.
[0 ∼ 1 / 0 / 1 /step]
• 0: Does not spool
• 1: Spools
Spools/does not spool jobs.
[0 ∼ 1 / 0 / 1 /step]
• 0: Does not spool
• 1: Spools
Initializes the hard disk.
[0 ~ 0 / 0 / 0 /step]
Use this SP mode only for hard disk error recovery.
5-34
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
Rev. 04/2003
SM