Ricoh Gestetner LANIER SAVIN G071 Service Manual page 135

Rev. 04/2003
Mode No.
5
(Class 1, 2, and 3)
955* Test Pattern
1 Pattern
2 Density
SM
CÓPIA NÃO CONTROLADA
Selects the test pattern. ⇒ Enable with SP2-917 (Test
Pattern), then send a job from a PC or print an SMC list.
[0 ~ 255 / 0 / 1 /step]
•
0: Normal operation
•
1: Vertical 1 dot & 1 line
•
2: Horizontal 1 dot & 1 line
•
3: Vertical 2 dots & 1 line
•
4: Horizontal 2 dots & 1 line
•
5: Grid – 1 dot & 1 line
•
6: Grid – 1 dot & dual lines
•
7: Independent dot pattern
•
8: 2 independent dots pattern
•
9: Black
• 10: Belt pattern
• 11: Trimmed area
• 12: 2 dots & 1 trimmed area
• 13: Slant grid
• 14: 2 dots & a slant grid
• 15: Horizontal (dots & a stitch pattern)
• 16: Check Flag
• 19: 4 independent dots
• 20: Horizontal 1 dot & a line (LD 1/2 reversals)
• 21: Grid – 1 dot & a line (LD 1/2 reversals)
• 22: Grid – 1 dot & dual lines (LD 1/2 reversals)
• 23: Independent 1 dot pattern (LD 1/2 reversals)
• 24: 3 line gray scale
• 25: Horizontal gray scale
• 26: Vertical gray scale
• 29: Horizontal gray scale extended
• 30: Vertical gray scale extended
• 31: Horizontal gray scale 600 dpi
• 32: Vertical gray scale 600 dpi
• 35: Horizontal gray scale with white spots
• 36: Vertical gray scale with white spots
• 38: Horizontal gray scale extended with white spots
• 39: Vertical gray scale extended with white spots
• 40: Horizontal gray scale 600 dpi with white spots
• 41: Vertical gray scale 601 dpi with white spots
• 43: White - for process evaluation
• 50: Vertical stitch & dot pattern
• 51: 2 beam density pattern
• 52: Trimmed area & cross pattern
• 53: Grid – 1 dot & 1 line (2)
• 54: Grid – 1 dot & dual lines (2)
• 55: Independent 2 dot pattern – 40 mm sub scan
• 56: Independent 2 dot pattern – 102.5 mm sub scan
• 57: Process control pattern
Reset to 0 after finishing the tests.
Adjusts the test pattern density
[0 ~ 255 / 255 / 1 /step]
5-37
CÓPIA NÃO CONTROLADA
SP MODE TABLES
Function / [ Setting ]
G071