Oil Supply And Cleaning; Oil Supply; Oil Path; Oil Recycling - Ricoh Gestetner LANIER SAVIN G071 Service Manual

6.9.4 OIL SUPPLY AND CLEANING

[A]: Oil supply unit
[B]: Oil tank
[C]: Felt
[D]: Oil supply roller
[E]: Oiling roller
[F]: Sponge cleaning roller
[G]: Metal cleaning roller

Oil Supply

! Photocopying Processes – Fusing – Oil Supply

Oil Path

The oil goes to the fusing belt as follows:
Oil tank [B]:
Felt [C]:
Oil supply roller [D]:
Oiling roller [E]:

Oil Recycling

The sponge cleaning roller [F] removes excess oil and foreign substances from the
belt. This oil returns to the oil supply roller [D] via the felt on the oil roller, and is
recycled. The metal cleaning roller [G] also removes foreign substances from the
belt.

Belt Cleaning

The roller carries a negative charge that removes foreign material from the belt.
G071
CÓPIA NÃO CONTROLADA
[D]
[A]
[B]
[C]
Contains silicone oil
Absorbs oil for transfer to the oil supply roller
Supplies the oiling roller with a small amount of oil
Supplies oil the fusing belt
6-48
CÓPIA NÃO CONTROLADA
FUSING UNIT AND OIL SUPPLY UNIT
[E]
[F]
[G]
G070D504.WMF
SM