Rtrv-Alm-<Aidtype - Paradyne Jetstream CPX-1000 Reference Manual

3. TL1 Commands and Messages
Table 3–21.Report Event Protection Group Parameters and Description
Parameter Parameter Type
protgroup_id
condtype ConditionType
condeff ConditionEffect
ocrdat Date
ocrtm Time
conddescr
RTRV-ALM-
<AIDType>
Security
Description
Related Messages
3-40
Description
This parameter identifies the Protection Group.
protgroup_id is the AID PROTGROUP.
This parameter defines the list of conditions or
alarms that occur on a CPX-1000.
This parameter indicates the effect of the event
based on the condition of the CPX-1000.
This parameter indicates the date when the
specific event or violation occurred.
This parameter indicates the time when the
specific event or violation occurred.
This parameter describes the alarm condition.
conddescr is a string.
Read only
Retrieve Alarm. This command generates a report on the current
state of alarm conditions within the CPX-1000. (The RTRV-COND
command generates a report on both alarms and conditions.)
Note
This message is essential to NMA.
< n acility>
REPT ALM DS F
REPT ALM ENV
REPT ALM IAD
REPT ALM IG
< ype>
REPT COND AIDT
REPT EVT IAD
REPT EVT IG
1000-A2-GH30-00
< acility>
REPT ALM OCF
REPT ALM EQPT
REPT ALM IADPORT
REPT ALM PROTGROUP
REPT EVT EQPT
REPT EVT IADPORT
REPT EVT PROTGRP
February 2003