Iad Provisioning; Ent-Iad - Paradyne Jetstream CPX-1000 Reference Manual

3. TL1 Commands and Messages
Table 3–22.Retrieve Alarm Parameters and Description (Continued)
Parameter Parameter Type
srveff ServiceEffect
entitytype AIDType
ocrdat Date
ocrtm Time
conddescr
IAD
Provisioning

ENT-IAD

Security
Description
Errors Generation
3-42
Description
This parameter indicates the effect on service
caused by the standing or alarm condition.
srveff is listable. If no value is specified, srveff
defaults to NSA (non-service affecting).
This parameter specifies the type of facility, link,
or other addressable entity targeted by the
message.
This parameter indicates the date when the
specific event or violation occurred.
ocrdat is optional.
This parameter indicates the time when the
specific event or violation occurred.
ocrtm is optional.
This parameter describes the alarm condition.
conddescr is a string and is optional.
The IAD provisioning category includes the following messages:
ENT-IAD (page 3-42)
ED-IAD (page 3-45)
DLT-IAD (page 3-47)
ED-IADPORT (page 3-48)
Read/Write
Enter IAD. This command creates a new Integrated Access Device
(IAD). An IAD Profile is given to provide default values for the
initial IAD ports. The IAD ports are created using the defaults
specified in the IAD Profile.
All Default errors.
1000-A2-GH30-00
February 2003