2. Parameter Types
TimingReference
TransportType
TroubleIsolated
2-30
This parameter indicates whether the termination is used as the
primary or secondary timing source for the system.
Note
This parameter is reserved for a future release.
Options
Description
NO
Not a timing source
NONE
Not a timing source
PRI
Primary timing source
SEC
Secondary timing source
This parameter specifies the transport type.
Options
Description
ATM
ATM
FR
Frame Relay
This parameter identifies the significance of the isolation
information provided by the AID parameter included in the
command message. This parameter also identifies activity required
to isolate the trouble to a replaceable or repairable unit, facility, etc.
Note
This parameter is reserved for a future release.
1000-A2-GH30-00
February 2003