Paradyne Jetstream CPX-1000 Reference Manual page 79

1000-A2-GH30-00
Table 3–16.Report Alarm Interface Group Parameters and Description
Parameter Parameter Type
ig_id
ntfcncde NotificationCode
condtype ConditionType
srveff ServiceEffect
ocrdat Date
February 2003
- -<
RTRV COND AIDT
- -
SET ATTR ENV
REPT ALM IG:[TID]:
"<ig_id>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,[<conddescr>]"
;
Output Format
CPX-1000 2000-06-08 18:44:57
** 278 REPT ALM IG
"GR303-1:MJ,EOCPRI,SA,06-08-
2000,18:44:57,,,,,:
EOC Primary link down,,,:,"
;
CPX-1000 2000-06-08 18:44:57
** 279 REPT ALM IG
"GR303-1:MJ,EOCSEC,SA,06-08-
2000,18:44:57,,,,,:
Figure 3–15. Report Alarm Interface Group Format and
Example
Description
This parameter identifies the Interface Group.
ig_id is the AID IG.
This is the alarm level. It signals the severity of a
new condition and has a value of CL (Clear) when
this message signals the clearing of a condition.
This parameter defines the list of conditions or
alarms that occur on a CPX-1000.
This parameter indicates the effect on service
caused by the standing or alarm condition.
This parameter indicates the date when the
specific event or violation occurred.
3. TL1 Commands and Messages
ype> -
SET
-
SET
Example
-< ype>
ATTR AIDT
-
ATTR LOG
3-31