Paradyne Jetstream CPX-1000 Reference Manual page 110

3. TL1 Commands and Messages
Table 3–32.Retrieve OC3 Parameters and Description (Continued)
Parameter Parameter Type
lfebe BoolYN
linecde LineCode
montype MonitoredType
protn BoolYN
pst PrimaryState
sst SecondaryState
3-62
Description
This parameter indicates that performance
monitoring data is to be gathered based on the
LINE FEBE. If no value is specified, lfebe defaults
to N.
lfebe is optional.
This parameter indicates line code.
linecde is optional.
This parameter indicates the monitored type.
montype is optional.
This parameter indicates whether the facility is a
protection facility. If no value is specified, protn
defaults to N.
protn is optional.
This parameter indicates the primary state of the
entity.
This parameter indicates the secondary state of
the entity.
1000-A2-GH30-00
February 2003