1000-A2-GH30-00
ED-IAD
Security
Description
Errors Generation
Table 3–24.Enter IAD Parameters and Description
Parameter
Parameter Type
src
ig
protgroup
vpi
February 2003
Read/Write
Edit IAD. This command modifies an existing IAD. All fields are
optional.
All Default errors.
ED-IAD:[TID]: <src>:[CTAG]::
[<ig>],[<protGroup>],[<vpi>],[<vci>],
[<transportType>],[<ports>],[<company>],
[<dslam>],[<subscriber>],[<pst>];
ED-IAD:TID:AID:CTAG::GR303,
ATM,VPI,VCI,TRANSPORT,PORTS,COMPANY,DSLAM,
SUBSCRIBER,PST;
Figure 3–23. Edit IAD Input Format
Description
This parameter identifies the IAD to be modified.
src is the AID IAD.
This parameter identifies the Interface Group. The
administrative state of the IAD must be locked
before this field can be modified.
ig is the AID IG.
This parameter identifies the network protection
group. The administrative state of the IAD must
be locked before this field can be modified.
protgroup is the AID ProtGroup and is listable and
rangeable.
This parameter specifies the virtual path identifier
(vpi). vpi is an integer. The valid entry is 0.
3. TL1 Commands and Messages
Example
3-45