Paradyne Jetstream CPX-1000 Reference Manual page 135

1000-A2-GH30-00
Table 4–2. General Error Codes (Continued)
Error Code (errcde)
SACS
SADC
SADS
SAMS
SAOS
SAPF
SCAT
SCBS
SCIS
SCNS
SCOS
SCSD
SCSN
SDBE
SEOS
SFYA
SLOS
SNCC
SNCN
SNDS
SNIM
SNIS
SNML
SNNB
February 2003
Error Type Error Message (errmsg)
STATUS Access Unit Can't Sync on Facility Signal
STATUS Already Disconnected
STATUS Access Unit in Diagnostic State
STATUS Already in Maintenance State
STATUS Already Out-of-Service
STATUS Access Path Continuity Check Failed
STATUS Circuit is Already Connected to Another Tap
STATUS Channel Busy
STATUS Circuit in Split Condition
STATUS Circuit Not in Split Condition
STATUS Channel Out-of-Service
STATUS Can't Split DS0B Circuit
STATUS Invalid Command Sequence
STATUS Internal Data Base Error
STATUS NTE is Out-of-Service
STATUS Facility Reports Yellow Alarm
STATUS TSC to RTU Link Out of Service
STATUS Not Cross-Connected
STATUS NTE Unable to Execute Command
STATUS NTE is in a Diagnostic State
STATUS NTE Access Complete, Circuit was in Monitor
State
STATUS Not in Service
STATUS No Monitor Line Established
STATUS NTE Could Not Sync on DS0B Signal
4. Error Codes
4-7