Rtrv-Protgrp - Paradyne Jetstream CPX-1000 Reference Manual

1000-A2-GH30-00

RTRV-PROTGRP

Security
Description
Errors Generation
Table 3–13.Retrieve Protection Group Parameters and Description
Parameter Parameter Type
ProtGroup_id
cable CableType
amember
February 2003
Read only
Retrieve Protection Group. This command retrieves information
about a CPX-1000 Protection Group.
All Default errors.
RTRV-PROTGRP:[TID]:<ProtGroup_id>:[CTAG];
Input Format
CPX-1000 2000-06-07 15:17:52
M 1 COMPLD
ATM-1:CABLE=STRAIGHTCABLE,MEMBER-A=CPX-11-
1,
MEMBER-B=CPX-12-1,ACTIVE=MEMBER-A
;
/* */
Figure 3–12. Retrieve Protection Group Format and
Example
Description
This parameter identifies the network or PSTN
protection group. ProtGroup_id is the AID
ProtGroup and is listable and rangeable.
ProtGroup_id must not be null.
This parameter indicates the type of cable used.
cable is optional.
This parameter indicates the primary member of a
Protection Group. amember is the AID DS.
amember is optional.
3. TL1 Commands and Messages
Example
3-25