Rept Dbchg - Paradyne Jetstream CPX-1000 Reference Manual

3. TL1 Commands and Messages

REPT DBCHG

Security
Description
Related Messages
Output Parameters
agent> ent-user-secu:cpx-1000:user01:1::password#1,,ROADM
CPX-1000 2001-01-03 11:47:03
M 1 COMPLD
/* User added */
;
CPX-1000 2001-01-03 11:47:03
A 0 REPT DBCHG
"DATE=2001-01-03,TIME=11-47-03,USERID=cpxuser,DBCHGSEQ=1:ent-
user-
secu:cpx-10
00:user01:"
;
3-52
Read only
Report Database Change. This message reports immediately to the
OS the CPX-1000 database changes that have occurred as a result
of commands to change equipment provisioning or configuration.
This message also includes changes to the value of the TID or SID,
the values of the keywords defined in the common block and
specific block, the transition into and out of OOS-MA state, and the
secondary state changes to RDLD. Examples of events and
commands that trigger this event include RMV, RST, ENT, ED,
DLT, Plug and Unplug, etc.
-
INIT LOG
-
RTRV LOG
- -
SET ATTR LOG
For each external update that has occurred, the response includes
one line of data in double quotes, followed by a carriage return line
feed. Within the quotes, the format resembles the block structure of
input commands. In fact, the blocks defined here resemble an
input command that would achieve a database change equivalent
to the external update.
Figure 3–27. Report Database Change Output Example
1000-A2-GH30-00
- -
RTRV ATTR LOG
- - 1
RTRV LOG TL LOG
February 2003