Paradyne Jetstream CPX-1000 Reference Manual page 107

1000-A2-GH30-00
Table 3–31.Report OC3 Alarm Parameters and Description
Parameter Parameter Type
oc_id
ntfcncde NotificationCode
condtype ConditionType
srveff ServiceEffect
ocrdat Date
ocrtm Time
February 2003
REPT ALM <OCFacility>: [TID]
"<oc_id>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,[<conddescr>],[<exptdbhvr>]"
;
Output Format
CPX-1000 2000-06-09 11:26:46
*C 342 REPT ALM OC3
"CPX-11-1:CR,LOS,SA,06-09-
2000,11:26:46,,,,,:
ATM-OC3 card 11 port 1 - SONET lost
signal,,,:,"
;
Figure 3–32. Report OC3 Alarm Format and Example
Description
This parameter indicates the optical carrier facility
id. oc_id is the AID OC.
This is the alarm level. It signals the severity of a
new condition and has a value of CL (Clear) when
this message signals the clearing of a condition.
This parameter lists conditions or alarms that
occur on a CPX-1000.
This parameter indicates the effect on service
caused by the standing or alarm condition.
Date when the specific event or violation
occurred.
This parameter indicates the date when the
specific event or violation occurred.
3. TL1 Commands and Messages
Example
3-59