Paradyne Jetstream CPX-1000 Reference Manual page 54

3. TL1 Commands and Messages
Table 3–3. Retrieve Parameters <DSnFacility> Parameters and Description
Parameter Parameter Type
ds_id
type Type
pst PrimaryState
sst SecondaryState
ais AlarmIndicationSignal
aisc ConditionType
cmdmde CommandMode
rnprty
3-6
Description
This parameter identifies AID for the DSn
equipment. ds_id is listable and rangeable.
ds_id must not be null.
This parameter is currently not supported.
This parameter is currently not supported
This parameter is currently not supported
This parameter indicates whether Alarm
Indication Signal (AIS) is being transmitted from
the entity being provisioned.
ais is optional.
This parameter indicates conditions on the input/
receive side of a connection under which AIS is
generated on the output side of a connection.
Use "&" and/or "or" to specify multiple
conditions. For example, AIS-L&AIS-PorAIS-V
aisc is optional.
This parameter indicates the command execution
mode (forced or normal).
cmdmde is optional.
This parameter indicates the priority of
equipment redundant switching to the plug-in
being provisioned. The range is from 0 to n, where
n is the number of entities protected by the
redundant entity.
0 is the default indicating do not switch this
entity
1 is the lowest priority
n is the highest priority
If all protected entities are given the same priority,
then the first failure stays protected regardless of
additional failed elements.
rnprty is an integer and is optional.
1000-A2-GH30-00
February 2003