Dgnroutineterm; Direction - Paradyne Jetstream CPX-1000 Reference Manual

2. Parameter Types

DgnRoutineTerm

Direction

2-12
This parameter specifies the termination method used for a
diagnostic routine in the event of a failure.
Note
This parameter is reserved for a future release.
Options Description
IMED Testing stops immediately when failure is
detected on a unit; then testing proceeds to
other remaining equipment units.
NORM The diagnostic terminates normally. The
CPX-1000 completes the entire set of phases
and iterations of the procedure regardless of
failed phases.
This parameter defines the direction to monitor or control.
Options Description
AZ Transmit
BTH Both directions
NA Not applicable
RCV Receive direction only
TDTC Transmit direction toward customer
TDTN Transmit direction toward network
TRMT Transmit direction only
ZA Receive
1000-A2-GH30-00
February 2003