2. Parameter Types
Cable
CableType
ChannelGoTo
2-6
This parameter is used for provisioning analog service.
Note
This parameter is reserved for a future release.
Options
Description
L
Loaded cable
NL
Non-loaded cable
This parameter defines the type of cable used.
Options
STRAIGHTCABLE
YCABLE
ChannelGoTo is used for provisioning analog service. This
parameter indicates the signaling state(s) to where the channel unit
should go under system failure conditions. It may be null if not
used by a particular implementation.
Note
This parameter is reserved for a future release.
Options
Description
OFFHK
Go on-hook for 2–3 seconds followed by
off-hook for duration of the failure.
ONHK
Go on-hook for the duration of the failure.
Description
Straight cable
Y-cable
1000-A2-GH30-00
February 2003