Paradyne Jetstream CPX-1000 Reference Manual page 9

Audience
Organization
February 2003
This TL1 Reference lists all commands and messages supported by
the TL1 Agent. This document also provides input and response
(output) formats and examples with those commands and
messages.
The TL1 Reference is written for network operations center crafts
personnel who manage and monitor alarms and events of the
CPX-1000 equipment. These readers should know the command
language interface and be familiar with TL1.
The TL1 Reference is organized as follows:
Chapter 1, Introduction, describes the Transaction Language
1 (TL1), a standard-based messages supported by the TL1
Agent.
Chapter 2, Parameter
parameter types defined for the TL1 messages.
Chapter 3, TL1 Commands and
TL1 commands and messages and provides input and
output formats and examples.
Chapter 4, Error
error codes.
Chapter 5, Environmental Alarm
valid values for the <almtype> parameter.
Types, describes all message
Messages, describes the
Codes, lists both the default and general
Types, lists and describes
Preface
vii