Paradyne Jetstream CPX-1000 Reference Manual page 52

3. TL1 Commands and Messages
Table 3–2. Report Alarm <DSnFacility> Parameters and Description
Parameter Parameter Type
ds_id
ntfcncde NotificationCode
condtype ConditionType
srveff ServiceEffect
ocrdat Date
ocrtm Time
conddescr
3-4
SID DATE TIME
** ATAG REPT ALM <DSnFacility>
"<ds_id>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,null[<conddescr>]"
;
Output Format
CPX-1000 98-06-20 14-30-00
** 001 REPT ALM T1
"AID:MN,CONDTYPE,NSA,OCRDAT,OCRTM,FEND,NA,
23,22,15-MIN:\"LOSS OF HOLDOVER\"
;
Figure 3–1. Report Alarm <DSnFacility> Format and
Example
Description
DSn Facility id.
ds_id is the AID DS.
This is the alarm level. It signals the severity of a new
condition and has a value of CL (Clear) when this
message signals the clearing of a condition.
This parameter defines the list of conditions or alarms
that occur on a CPX-1000.
This parameter indicates the effect on service caused
by the standing or alarm condition.
This parameter indicates the date when the specific
event or violation occurred.
This parameter indicates the time when the specific
event or violation occurred.
This parameter describes the alarm condition.
conddescr is a string and is optional.
1000-A2-GH30-00
Example
February 2003