Paradyne Jetstream CPX-1000 Reference Manual page 67

1000-A2-GH30-00
Table 3–9. Retrieve IAD Parameters and Description (Continued)
Parameter Parameter Type
vpi
vci
trs TransportType
pst PrimaryState
sst SecondaryState
February 2003
Description
This parameter specifies the virtual path identifier
(vpi).
vpi is an integer and the valid entry is 0.
This parameter specifies the virtual circuit
identifier (vci).
vci is an integer and the valid range is between 1
to 1024.
This parameter identifies the transport type: ATM
or Frame Relay.
transport is a string and is listable.
This parameter indicates the primary state of the
entity.
This parameter indicates the secondary state of
the entity.
sst is optional.
3. TL1 Commands and Messages
3-19