Stsfacility - Paradyne Jetstream CPX-1000 Reference Manual

3. TL1 Commands and Messages

STSFacility

Security
Description
Errors Generation
Table 3–39.Retrieve STS1 Parameters and Description
Parameter Parameter Type
sts_id
type Type
aisnc NotificationCode
3-72
This category contains one message: RTRV–<STSFacility>
Read only
RTRV–<STSFacility> (Retrieve (STS1). This message retrieves
parameters associated with an STS facility.
All Default Errors.
RTRV-<STSFacility>:[TID]:<sts_id>:
[CTAG];<type>:[AISNC=<aisnc>],[EXPTRC=<exptrc>
],
[FEPM=<fepm>],[GOS=<gos>],[MONTYPE=<montype>],
Input Format
CPX-1000 2000-06-12 05:42:51
M 1 COMPLD
CPX-1-1:STS1::IS,ACT
;
Figure 3–41. Retrieve STS1 Format and Example
Description
This parameter identifies AID for synchronous
transport signal entity. sts_id is the AID STS and is
listable and rangeable. sts_id must not be null.
This parameter identifies the type of entity being
provisioned.
type is listable.
This parameter indicates the alarm status when a
VT path AIS is detected. If no value is specified,
asinc defaults to "not reported."
aisnc is optional.
1000-A2-GH30-00
Example
February 2003