Paradyne Jetstream CPX-1000 Reference Manual page 76

3. TL1 Commands and Messages
Table 3–14.Report Alarm IAD Parameters and Description
Parameter Parameter Type
iad_id
ntfcncde NotificationCode
condtype ConditionType
srveff ServiceEffect
ocrdat Date
ocrtm Time
conddescr
3-28
REPT ALM IAD: [TID]:
"<iad_id>:<ntfcncde>,<condtype>,<srveff>,
<ocrdat>,<ocrtm>,[<conddescr>]"
;
Output Format
CPX-1000 2001-02-22 16:20:53
** 40 REPT ALM IAD
"00001:MJ,LOSSOFLINK,SA,02-22-
2001,16:20:53,,,
,,: Lost link with IAD 00001,,,:,"
;
Figure 3–13. Report Alarm IAD Format and Example
Description
This parameter identifies the Integrated Access
Device. iad_id is the AID IAD.
This is the alarm level. It signals the severity of a
new condition and has a value of CL (Clear) when
this message signals the clearing of a condition.
This parameter defines the list of conditions or
alarms that occur on a CPX-1000.
This parameter indicates the effect on service
caused by the standing or alarm condition.
This parameter indicates the date when the
specific event or violation occurred.
This parameter indicates the time when the
specific event or violation occurred.
This parameter describes the alarm condition.
conddescr is a string and is optional.
1000-A2-GH30-00
Example
February 2003