Table of Contents
Advertisement
4.9.2.1 Ping
This page allows you to issue ICMP (IPv4) PING packets to troubleshoot IP connectivity issues.
After you press "Start", ICMP packets are transmitted, and the sequence number and round trip time are displayed upon
reception of a reply. The page refreshes automatically until responses to all packets are received, or until a timeout occurs. The
ICMP Ping screen in
Figure 4-9-12
The page includes the following fields:
Object
Hostname or IP
Address
Payload Size
Payload Data Pattern
Packet Count
TTL Value
VID for Source
Interface
appears.
Figure 4-9-12: ICMP Ping Page Screenshot
Description
The address of the destination host, either as a symbolic hostname or an IP
Address.
Determines the size of the ICMP data payload in bytes (excluding the size of
Ethernet, IP and ICMP headers). The default value is 56 bytes. The valid range
is 2-1452 bytes.
Determines the pattern used in the ICMP data payload. The default value is 0.
The valid range is 0-255.
Determines the number of PING requests sent. The default value is 5. The valid
range is 1-60.
Determines the Time-To-Live /TTL) field value in the IPv4 header. The default
value is 64. The valid range is 1-255.
This field can be used to force the test to use a specific local VLAN interface as
the source interface. Leave this field empty for automatic selection based on
routing configuration.
432
User's Manual of WGS-5225-8P2S Series
Advertisement
Table of Contents
