Source Port Number
Address for Source
Interface
Quiet (only print
result)
Buttons
: Click to transmit ICMP packets.
: Click to re-start diagnostics with PING.
This field can be used to force the test to use a specific local interface with the
specified port number as the source interface. The specified port must be
configured with a suitable IP address. Leave this field empty for automatic
selection based on routing configuration.
Note: You may only specify either the Source Port Number or the IP Address for
the source interface.
This field can be used to force the test to use a specific local interface with the
specified IP address as the source interface. The specified IP address must be
configured on a local interface. Leave this field empty for automatic selection
based on routing configuration.
Note: You may only specify either the VID or the IP Address for the source
interface.
Checking this option will not print the result of each ping request but will only
show the final result.
435
User's Manual of WGS-5225-8P2S Series