Protocol-Based Vlan - Planet WGS-5225-8P2SV User Manual

4.3.6.3 Protocol-based VLAN

This page allows you to add new Protocol to Group Name (each protocol can be part of only one Group) mapping
entries as well as allow you to see and delete already mapped entries for the switch .
The following table shows the items on this page.
Object
 Delete
 Frame Type
 Value
Figure 4-3-38: Protocol to Group Mapping Table
Description
To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted from the switch during the next Save.
Frame Type can have one of the following values:
1. Ethernet
2. LLC
3. SNAP
Note: When changing the Frame type field, the valid value of the following text
field will vary depending on the new frame type you selected.
Valid value that can be entered in this text field depends on the option selected
from the preceding Frame Type selection menu.
Below are the criteria for the three different Frame Types:
1. Ethernet: Value in the text field when Ethernet is selected as a Frame Type is
called etype. Valid values for etype range between 0x0600 and 0xffff
2. LLC: Valid value in this case is comprised of two different sub-values.
a. DSAP: 1-byte long string (0x00-0xff)
b. SSAP: 1-byte long string (0x00-0xff)
3. SNAP: Valid value in this case is also comprised of two different sub-values.
a. OUI: OUI (Organizationally Unique Identifier) is a parameter in the format of
xx-xx-xx where each pair (xx) in the string is a hexadecimal value ranging
between 0x00 and 0xff.
b. PID: PID (Protocol ID). If OUI is hexadecimal 000000, then the protocol ID is
158
User's Manual of WGS-5225-8P2S Series