4.3.12.1 MVR Configuration
. This page provides MVR related configuration. The MVR screen in
The page includes the following fields:
Object
MVR Mode
Delete
MVR VID
MVR Name
IGMP Address
Figure 4-3-74: MVR Configuration Page Screenshot
Description
Enable/Disable the Global MVR.
The Unregistered Flooding control depends on the current configuration in IGMP/MLD
Snooping.
It is suggested to enable Unregistered Flooding control when the MVR group table is full.
Check to delete the entry. The designated entry will be deleted during the next save.
Specify the Multicast VLAN ID.
Be Caution: MVR source ports are not recommended to be overlapped with
management VLAN ports.
MVR Name is an optional attribute to indicate the name of the specific MVR VLAN.
Maximum length of the MVR VLAN Name string is 16. MVR VLAN Name can only
contain alphabets or numbers. When the optional MVR VLAN name is given, it should
contain at least one alphabet. MVR VLAN name can be edited for the existing MVR
VLAN entries or it can be added to the new entries.
Define the IPv4 address as source address used in IP header for IGMP control frames.
The default IGMP address is not set (0.0.0.0).
User's Manual of WGS-5225-8P2S Series
Figure 4-3-74
appears
208