Planet WGS-5225-8P2SV User Manual page 349

The page includes the following fields:
Object
 User
 ACE
 Frame Type
 Action
 Rate Limiter
 CPU
 Counter
 Conflict
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page.
Description
Indicates the ACL user.
Indicates the ACE ID on local switch.
Indicates the frame type of the ACE. Possible values are:
Any: The ACE will match any frame type.
■
EType: The ACE will match Ethernet Type frames. Note that an
■
Ethernet Type based ACE will not get matched by IP and ARP
frames.
ARP: The ACE will match ARP/RARP frames.
■
IPv4: The ACE will match all IPv4 frames.
■
IPv4/ICMP: The ACE will match IPv4 frames with ICMP protocol.
■
IPv4/UDP: The ACE will match IPv4 frames with UDP protocol.
■
IPv4/TCP: The ACE will match IPv4 frames with TCP protocol.
■
IPv4/Other: The ACE will match IPv4 frames, which are not
■
ICMP/UDP/TCP.
IPv6: The ACE will match all IPv6 standard frames.
■
Indicates the forwarding action of the ACE.
Permit: Frames matching the ACE may be forwarded and learned.
■
Deny: Frames matching the ACE are dropped.
■
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When
Disabled is displayed, the rate limiter operation is disabled.
Forward packet that matched the specific ACE to CPU
The counter indicates the number of times the ACE was hit by a frame.
Indicates the hardware status of the specific ACE. The specific ACE is not
applied to the hardware due to hardware limitations.
349
User's Manual of WGS-5225-8P2S Series