The page includes the following fields:
MSTx MSTI Port Configuration
Object
Port
Path Cost
Priority
Buttons
: Click to set MSTx configuration
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Description
The switch port number of the corresponding STP CIST (and MSTI) port.
Controls the path cost incurred by the port. The Auto setting will set the path
cost as appropriate by the physical link speed, using the 802.1D recommended
values. Using the Specific setting, a user-defined value can be entered. The
path cost is used when establishing the active topology of the network. Lower
path cost ports are chosen as forwarding ports in favor of higher path cost ports.
Valid values are in the range 1 to 200000000.
Controls the port priority. This can be used to control priority of ports having
identical port cost.
182
User's Manual of WGS-5225-8P2S Series