The page includes the following fields:
Object
User
QCE#
Port
Frame Type
Action
Conflict
Buttons
: Select the QCL status from this drop down list.
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to release the resources required to add QCL entry, in case the conflict status for any QCL entry
is 'yes'.
: Click to refresh the page.
Description
Indicates the QCL user.
Indicates the index of QCE.
Indicates the list of ports configured with the QCE.
Indicates the type of frame to look for incoming frames. Possible frame types
are:
Any: The QCE will match all frame types.
■
Ethernet: Only Ethernet frames (with Ether Type 0x600-0xFFFF)
■
are allowed.
LLC: Only (LLC) frames are allowed.
■
SNAP: Only (SNAP) frames are allowed.
■
IPv4: The QCE will match only IPV4 frames.
■
IPv6: The QCE will match only IPV6 frames.
■
Indicates the classification action taken on ingress frame if parameters
configured are matched with the frame's content.
There are three action fields: Class, DPL and DSCP.
Class: Classified QoS class; if a frame matches the QCE it will be
■
put in the queue.
DPL: Drop Precedence Level; if a frame matches the QCE then DP
■
level will set to value displayed under DPL column.
DSCP: If a frame matches the QCE then DSCP will be classified
■
with the value displayed under DSCP column.
Displays Conflict status of QCL entries. As H/W resources are shared by
multiple applications. It may happen that resources required to add a QCE may
not be available, in that case it shows conflict status as 'Yes', otherwise it is
always 'No'.
Please note that conflict can be resolved by releasing the H/W resources
required to add QCL entry on pressing 'Resolve Conflict' button.
301
User's Manual of WGS-5225-8P2S Series