The page includes the following fields:
Instance Data:
Object
APS #
Mode
SMAC
Level
VLAN
PCP
Rev
TxAps
WTR
HoldOff
Enable
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page; any changes made locally will be undone.
Description
The ID of the APS. Maximum number of creatable APS instances is 10 . Click on
link to get to APS instance page, you can reset counters and issue commands.
1:1 This will create a 1:1 APS
1+1 Uni This will create a 1+1 Unidirectional APS.
1+1 Bi This will create a 1+1 Bidirectional APS.
Source MAC address used in L-APS PDUs. Must be a unicast address. If all-
zeros, the switch port's MAC address will be used.
MD/MEG Level (0-7).
The VLAN ID used in the L-APS PDUs. 0 means untagged.
PCP (priority) (default 7). The PCP value used in the VLAN tag unless the L-
APS PDU is untagged. Must be a value in range 0 - 7.
When checked, the port recovery mode is revertive, that is, traffic switches back
to the working port after the condition(s) causing a switch has cleared. In the
case of clearing a command (e.g. forced switch), this happens immediately. In
the case of clearing of a defect, this generally happens after the expiry of the
WTR (Wait-To-Restore) timer.
When unchecked, the port recovery mode is non-revertive and traffic is allowed
to remain on the protect port after a switch reason has cleared.
Choose whether this end transmits APS PDUs. Only used for 1+1,
unidirectional.
When Rev is checked, WTR (Wait-To-Restore) tells how many seconds to wait
before restoring to the working port after a fault condition has cleared. Valid
range 1 - 720
When a new (or more severe) defect occurs, the hold-off timer will be started
and the event will be reported after the timer expires. HoldOff time is measured
in milliseconds, and valid values are in the range 0 - 10000. Default is 0, which
means immediate reporting of the defect.
The administrative state of this APS instance. Check to make it function normally
and uncheck to make it cease functioning.
398
User's Manual of WGS-5225-8P2S Series