Snmp System Configuration - Planet WGS-5225-8P2SV User Manual

SNMP default communities are:
Write = private
。
Read = public
。
Use the SNMP Menu to display or configure the Managed Switch's SNMP function. This section has the following items:
 System Configuration
 System Information
 SNMP Trap Configuration
 Trap Source Configuration
 SNMPv3 Communities
 SNMPv3 Users
 SNMPv3 Groups
 SNMPv3 Views
 SNMPv3 Access

4.2.2.2 SNMP System Configuration

Configure SNMP on this page. The SNMP System Configuration screen in
The page includes the following fields:
Object

Mode

Engine ID
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Configure SNMP on this page.
The system information is provided here.
Configure SNMP trap on this page.
provides SNMP
Configure SNMPv3 communities table on this page.
Configure SNMPv3 users table on this page.
Configure SNMPv3 groups table on this page.
Configure SNMPv3 views table on this page.
Configure SNMPv3 accesses table on this page.
Figure 4-2-20: SNMP System Configuration Page Screenshot
Description
Indicates the SNMP mode operation. Possible modes are:

Enabled: Enable SNMP mode operation.

Disabled: Disable SNMP mode operation.

Indicates the SNMPv3 engine ID. The string must contain an even number
(in hexadecimal format) with number of digits between 10 and 64, but all-
zeros and all-'F's are not allowed. Only users on this Engine ID can access
the device (local users), so changing the Engine ID will revoke access for all
current local users.
User's Manual of WGS-5225-8P2S Series
trap source configurations.
Figure 4-2-20 appears.
74