Planet WGS-5225-8P2SV User Manual page 265

 Flow Sampler Max.
Header
 Counter Poller
Enabled
 Counter Poller Interval
Buttons
: Click to apply changes. Note that sFlow configuration is not persisted to non-volatile memory.
: Click to undo any changes made locally and revert to previously saved values.
: Click to update values.
The maximum number of bytes that should be copied from a sampled packet to
the sFlow datagram. Valid range is 14 to 200 bytes with default being 128 bytes.
To have room for any frame, the
bytes larger than the maximum header size. If the
not take into account the maximum header size, samples may be dropped.
Enables/disables counter polling on this port.
With counter polling enabled, this specifies the interval - in seconds - between
counter poller samples. Valid range is 1 to 3600 seconds.
265
User's Manual of WGS-5225-8P2S Series
maximum datagram size should be roughly 100
maximum datagram size does