Table of Contents
Advertisement
3. Press "Refresh" button for the currently connected devices in the discovery list as the screen is shown as follows.
This utility shows all the necessary information from the devices, such as MAC Address, Device Name, firmware version
1.
and Device IP Subnet address. A new password, IP Subnet address and description can be assigned to the devices.
After setup is completed, press "Update Device", "Update Multi" or "Update All" button to take affect. The meaning of
2.
the 3 buttons above are shown below:
Update Device: use current setting on one single device.
Update Multi: use current setting on choose multi-devices.
Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be found in "Option" tools bar.
To click the "Control Packet Force Broadcast" function, it allows new setting value to be assigned to the Web Smart
3.
Switch under a different IP subnet address.
Press "Connect to Device" button and then the Web login screen appears in
4.
Press "Exit" button to shut down the planet Smart Discovery Utility.
5.
Figure 3-7: Planet Smart Discovery Utility Screen
47
User's Manual of WGS-5225-8P2S Series
Figure 3-7.
Advertisement
Table of Contents
