Schedule; Auto-Ping - Planet IPM-4220 User Manual

4.2.3

Schedule

In this option, work schedule of the time for power outlet on/off is seen.
Parameters
Period
Time
Action
Delete
4.2.4

Auto-Ping

When the power supply connects with network devices, this menu can set the address of the network
device, detect time interval, detection frequency, time of reboot and re-detection.
Parameters
Ping
Host
Ping Interval Time
(Min.)
Ping Times
(Detection
frequency)
Reboot
Set the work cycle of the power outlet; the cycle can be divided into
Holiday, Month, Week, and Day. For example, if the cycle is Day, it
means the power will perform the command at the set time every
day.
Set the work hours of the power outlet in the drop-down list.
Set up power outlet to perform the command of "on", "off", "Reboot"
or "Short on".
To delete the schedule, click the icon of "Delete" of the schedule.
Enable / Disable network detection.
Network device address to be detected.
Execute the time interval of PING network devices.
Frequency of continuous abnormality during Ping network device,
when the detected Ping failure frequency exceeds this set value;
alert will be given through message or email.
Set whether to reboot the network device when the detected Ping
failure frequency exceeds this set value.
41
- -
IP-based 4/8-port Switched Power Manager Power
Description
Description
IPM-4220 / IPM-8220