4.3.19 sFlow
4.3.19.1 sFlow Configuration
This page allows for configuring sFlow. The configuration is divided into two parts: Configuration of the sFlow
receiver (a.k.a. sFlow collector) and configuration of per-port flow and counter samplers.
sFlow configuration is not persisted to non-volatile memory, which means that a reboot will disable sFlow
sampling.
The following explains how tp configure the sFlow.
Agent Configuration
Object
IP Address
Figure 4-3-105: sFlow Configuration
Description
The IP address used as Agent IP address in sFlow datagrams. It serves as a
unique key that will identify this agent over extended periods of time.
Both IPv4 and IPv6 addresses are supported.
263
User's Manual of WGS-5225-8P2S Series