Table of Contents
Advertisement
Please press the Add New Rule button to start setting PoE Schedule function. You have to set PoE schedule to profile and
then go back to PoE Port Configuration, and select "Schedule" mode from per port "PoE Mode" option. You can then indicate
which schedule profile could be applied to the PoE port.
The page includes the following fields:
Object
Profile
Delete
Week Day
Start Hour
Start Min
End Hour
End Min
Reboot Enable
Figure 4-7-5: PoE Schedule Screenshot
Description
Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
Allows user to delete the schedule setting.
Allows user to set week day for defining PoE function should be enabled on the day.
Allows user to set what hour does PoE function enables.
Allows user to set what minute does PoE function enables.
Allows user to set what hour does PoE function disables.
Allows user to set what minute does PoE function disables.
Allows user to enable or disable whole PoE port reboot by PoE reboot schedule. Please be
noticed that if you want to PoE schedule and PoE reboot schedule work at the same time,
please use this function, and don't use Reboot Only function.
User's Manual of WGS-5225-8P2S Series
410
Advertisement
Table of Contents
