Table of Contents
Advertisement
User's Manual of WGS-5225-8P2S Series
5.5 Auto-Negotiation
The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth
when a connection is established with another network device (usually at Power On or Reset). This is done by detecting the
modes and speeds at the second of both devices that are connected and capable of. Both 10BASE-T and 100BASE-TX
devices can connect with the port in either Half- or Full-Duplex mode. 1000BASE-T can be only connected in Full-duplex
mode.
444
Advertisement
Table of Contents
