Snooping Table - Planet WGS-5225-8P2SV User Manual

Industrial l2+ 8-port 10/100/1000t 802.3at poe+2-port 1g/2.5g sfp wall-mount managed switch
Hide thumbs Also See for WGS-5225-8P2SV:
Table of Contents

Advertisement

4.5.6.2 Snooping Table

This page display the dynamic IP assigned information after DHCP Snooping mode is disabled. All DHCP clients
obtained the dynamic IP address from the DHCP server will be listed in this table except for local VLAN interface
IP addresses. Entries in the Dynamic DHCP snooping Table are shown on this page
Table screen in
Figure 4-5-25
Figure 4-5-25: Dynamic DHCP Snooping Table Screen Page Screenshot
Object
 MAC Address
 VLAN ID
 Source Port
 IP Address
 IP Subnet Mask
 DHCP Server Address
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
Refreshes the displayed table starting from the input fields
:
Flushes all dynamic entries.
:
will use the last entry of the currently displayed table as a basis for the next lookup. When the end
: It
is reached the text "No more entries" is shown in the displayed table
start over
: To
appears.
Description
User MAC address of the entry.
VLAN-ID in which the DHCP traffic is permitted.
Switch Port Number for which the entries are displayed.
User IP address of the entry.
User IP subnet mask of the entry.
DHCP Server address of the entry.
User's Manual of WGS-5225-8P2S Series
367
. The Dynamic DHCP Snooping

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wgs-5225-8p2s

Table of Contents