Ipv6 Ping - Planet WGS-5225-8P2SV User Manual

4.9.2.2 IPv6 Ping

This page allows you to issue ICMPv6 PING packets to troubleshoot IPv6 connectivity issues.
CMP packets are transmitted, and the sequence number and round trip time are displayed
After you press "Start", I
upon reception of a reply.
occurs. The ICMPv6 Ping screen in
The page includes the following fields:
Object

Hostname or IP
Address
 Payload Size
 Payload Data Pattern
 Packet Count
 TTL Value
 VID for Source
Interface
The page refreshes automatically until responses to all packets are received, or until a timeout
Figure 4-9-13 appears.
Figure 4-9-13: ICMPv6 Ping Page Screenshot
Description
The address of the destination host, either as a symbolic hostname or an IP
Address.
Determines the size of the ICMP data payload in bytes (excluding the size of
Ethernet, IP and ICMP headers). The default value is 56 bytes. The valid range
is 2-1452 bytes.
Determines the pattern used in the ICMP data payload. The default value is 0.
The valid range is 0-255.
Determines the number of PING requests sent. The default value is 5. The valid
range is 1-60.
Determines the Time-To-Live /TTL) field value in the IPv4 header. The default
value is 64. The valid range is 1-255.
This field can be used to force the test to use a specific local VLAN interface as
the source interface. Leave this field empty for automatic selection based on
routing configuration.
Note: You may only specify either the VID or the IP Address for the source
interface.
User's Manual of WGS-5225-8P2S Series
434