Planet WGS-5225-8P2SV User Manual page 271

Port Enable and Configuration
Object
 Port Enable
 Configuration
The port data set is defined in the IEEE 1588 Standard. It holds three groups of data: the static members, the dynamic
members, and configurable members which can be set here.
Port Data Set
Object
 Port
 Stat
 MDR
 Peer Mean Path Del
 Anv
 ATo
 Syv
 Dlm
 MPR
Description
Set check mark for each port configured for this Clock Instance.
Click 'Ports Configuration' to edit the port data set for the ports assigned to
this clock instance.
Description
Static member port Identity : Port number [1..max port no]
Dynamic member portState: Current state of the port.
Dynamic member log Min Delay Req Interval: The delay request interval
announced by the master.
The path delay measured by the port in P2P mode. In E2E mode this value is 0
The interval for issuing announce messages in master state. Range is -3 to 4.
The timeout for receiving announce messages on the port. Range is 1 to 10.
The interval for issuing sync messages in master. Range is -7 to 4.
Configurable member delayMechanism:
The delay mechanism used for the port:
e2e End to end delay measurement
p2p Peer to peer delay measurement.
Can be defined per port in an Ordinary/Boundary clock.
In a transparent clock all ports use the same delay mechanism, determined by
the clock type.
The interval for issuing Delay_Req messages for the port in E2e mode.
271
User's Manual of WGS-5225-8P2S Series