Status - Planet WGS-5225-8P2SV User Manual

4.3.18.5 Status

Monitor CFM Status on this page.
Monitor CFM Status on this page.
Object
 Domain
 Service
 MEPID
 Port
 State
 SMAC
 Defects
Figure 4-3-104: CFM MEP Status
Description
Name of Domain under which this Service resides.
Name of Service under which this MEP resides.
The identification of this MEP. Must be an integer [1..8091]
Port on which this MEP resides.
Active Operational state of the MEP.
: OFF. This indicates that the MEP Admin State is disabled.
: DOWN. The MEP Admin State is enabled, but an error state exists.
: UP. The MEP Admin State is enabled, and no errors and defects exists.
Fng : Holds the current state of the Fault Notification Generator State Machine.
Values will be one of the following:
state Description
No defect has been present since reset timer expired or the
reset
State Machine was last reset.
A defect is present, but not for a long enough time to be
defect
reported.
reportDefect A transient state during which the defect is reported.
defectReported A defect is present, and some defect has been reported.
No defect is present, but the ResetTime timer has not yet
defectClearing
expired.
This MEP's MAC address.
Highest Highest priority defect that has been present since the MEP's fault
notification generator state machine was last in the reset state.
Defects : A MEP can detect and report a number of defects, and multiple
defects can be present at the same time. This is indicated the following letter
code.
261
User's Manual of WGS-5225-8P2S Series