Table of Contents
Advertisement
50
Chapter 5—Input Channels
shows how it works.
Routing
The Routing switches on input channels 13 and 14 (likewise 15 and 16) are perma-
nently linked. When input channels 1 through 12 are paired ("Pairing Input Channels"
on page 52), their Routing switches are not linked.
Monitoring Input Channels
Input channels can be monitored using the monitor out or phones. See "Monitor
Setup" on page 78 for more information.
Input Channels & Aux Sends
Signals from input channels 1 through 16 can be sent to aux sends 1 through 4, while
those from input channels 17 through 24 can be sent to aux sends 1 and 2. Input chan-
nel sends can be configured as either pre-fader or post-fader sends. When aux sends are
paired, aux send panpots become available on each input channel. See "Aux Sends" on
page 93 for more information.
Input Channels & the Omni Outs
Direct signals from input channels 1 through 16 can be selected for the omni outs. See
"Omni Outs" on page 115 for more information. Note that OMNI OUTs are not
affected by the D switches on the PAN/ROUT page 2.
Input Channels & the Option I/O Outs
Input channels 1 through 16 can be selected as sources for the Option I/O outs. See
"Routing Input Channels" on page 49 and "About Option I/O Cards" on page 216 for
more information.
01V—Owner's Manual
Pan
Signals are fed equally to bus outs 1 and 2 and the left and right
channels of the stereo out.
Signals are fed to bus out 1 and the left channel of the stereo
out.
Signals are fed to bus out 2 and the right channel of the stereo
out.
Signal Destination
- Quick Links:
- Assigning Omni Outs
- Using the Effects
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 01V and is the answer not in the manual?
Questions and answers
What is the the procedure to record with o1v yamaha digital mixer
To record using the Yamaha 01V digital mixer, follow these steps:
1. A/D Conversion: Audio signals are converted to digital using the 01V’s 20-bit 128-times oversampling A/D converters.
2. Digital Signal Processing: The mixer processes audio digitally using Yamaha DSPs, ensuring minimal noise, distortion, and crosstalk.
3. Digital Connectivity: To maintain signal quality, use an Option I/O interface card to connect the 01V directly to a modular digital multitrack recorder.
4. Recording to Computer: If using a computer, install an ADAT interface card (such as the Yamaha MY8AT) to enable an ADAT lightpipe connection for transferring up to 8 channels.
5. Final Mix Output: The final stereo mix can be sent to a two-track digital recorder using the 01V’s Coaxial STEREO OUT.
6. Avoid Multiple Conversions: Keep audio in the digital domain to prevent signal degradation from multiple AD/DA conversions.
For better quality and higher sample rates, consider using a dedicated audio interface instead of the 01V.
This answer is automatically generated