Auto Gain Adjustment function
If you adjust the HA gain on the master CS1D (master for HA
control), the attenuation on a slave CS1D can automatically be
adjusted so that the channel output levels will remain
ANALOG OUTPUT BOX
The master unit is the CS1D (or PM1D Manager) connected
via a DSP1D that is connected to the port through which the
AI8 is controlled. The slave unit is the CS1D (or PM1D Man-
ager) connected via a DSP1D that is connected to any port
other than the master. You can switch between the master and
■ Switching the Auto Gain Adjustment
function on and off
1. On the slave CS1D, display the ATT screen for the
IN EQ function.
AUTO GAIN ADJUSTMENT button
SET ALL and CLEAR ALL buttons
GAIN ADJ buttons
2. In the upper left of the screen, click the AUTO
GAIN ADJUSTMENT button to enable the func-
The Auto Gain Adjustment function is now enabled.
3. Turn the GAIN ADJ button on or off to switch the
function for each channel on or off.
• Click the SET ALL button to turn on the function for all channels
globally. Click the CLEAR ALL button to turn off the function for
all channels globally.
• In most cases, turn on the Auto Gain Adjustment function only on
the slave CS1D unit. If you turn on the function on the master
CS1D unit, the output level of the master CS1D will also be
• The GAIN ADJ button's on/off status is not linked even if the cor-
responding two channels are paired. Even if the GAIN ADJ but-
ton of either one of the paired channels is turned on, the
attenuators will not be linked.
• When you turn off the GAIN ADJ button for one of the paired
channels, the attenuator value for the even-numbered channel
will change to the value for the odd-numbered channel. In this
case, please note that the volume level might increase more than
• If the attenuator values are selected as one of the Recall Safe
items, and if the GAIN ADJ button for the recalled scene is set to
on, this function will apply to the recalled HA gain. The Recall
Safe function does not apply to the GAIN ADJ button and AUTO
GAIN ADJUSTMENT button settings. Therefore, you must ﬁrst
store these button settings in the scenes.
PM1D Manager Remote Control func-
Connecting the PM1D Manager and a Yamaha digital mixing
console (DM2000, 02R96, or DM1000) via USB enables you to
remotely control the PM1D system from the digital mixing
console. For details, refer to the PM1D Manager V2 Owner's
Yamaha digital mixer
(DM2000 V2, 02R96 V2,