Parameter Wheel; Data Entry & Transport Section - Yamaha DM2000 Owner's Manual

237
Control Surface Operation with the Pro Tools Remote Layer
Data Entry & Transport Section
REW FF STOP PLAY REC
DISPLAY HISTORY
BACK FORWARD
(EDIT MODE) (EDIT TOOLS)
DEC INC
(ESC) (CURSOR MODE)
SHUTTLE
SCRUB
ENTER
[REW] button
This button rewinds from the current cursor position (it's non-latching).
[FF] button
This button fast forwards from the current cursor position (it's non-latching).
[STOP] button
This button stops playback and recording.
[PLAY] button
This button starts playback from the current cursor position.
[REC] button
This button arms Pro Tools for recording ([REC] button indicator flashing), recording is
started by pressing the [PLAY] button ([REC] button indicator lit continuously).
[BACK] (EDIT MODE) button
This button is used to select the following edit modes: Shuffle, Slip, Spot, and Grid.
[FORWARD] (EDIT TOOLS) button
This button is used to select the following edit tools: Zoomer, Trimmer, Selector, Grabber,
SmartTool, Scrubber, and Pencil.

Parameter Wheel

The Parameter wheel is used for shuttling and scrubbing (see page 249). It's also used for
making fine adjustments to the selected region (see page 248).
DM2000 Version 2—Owner's Manual