Component Names And Functions; Rear Panel - Yamaha AG03MK2 User Manual

Component names and functions > Rear panel

Component names and functions

Rear panel

a
[U] USB 2.0 jack (USB-C)
Connect your computer or iPhone/iPad here. When connecting a computer, power will be supplied from the
computer to this unit. When connecting an iPhone/iPad, connect a USB power adapter (sold separately) to the
DC] USB port.
NOTE
A dedicated driver is required to use this product with Windows® computers. Download and install the driver from the
following website.
AG03MK2 :
https://www.yamaha.com/2/ag03mk2/
AG06MK2 :
https://www.yamaha.com/2/ag06mk2/
NOTICE
Do not connect any other devices except for an iPhone, iPad or a computer to the USB 2.0 port.
(
A 5 V and 1 A power supply is required to operate this product on bus power. If a stable power supply cannot be
(
provided, supply power from the separately available [5V DC IN] USB port.
Points of caution when using the USB port
Observe the following points to prevent loss of data when connecting the USB port to other devices.
Make sure to use the USB cable packaged with this product.
(
Observe the following before inserting or unplugging the USB cable.
(
Quit all applications.
(
Make sure that no data is being transmitted from this product.
(
After you unplug the cable, make sure to wait for at least six seconds before plugging the cable in again. Rapidly
(
plugging in and unplugging the cable may cause a malfunction.
b a
9
b a
b
[5V