Voltage Measurement (V) - AEMC 607 User Manual

4.5 VOLTAGE MEASUREMENT (V)

To measure voltage, proceed as follows:
1. Set the switch to
2. Connect the black lead to the COM terminal and the red lead to
+
the terminal.
3. Connect the test probes or the alligator clips to the circuit to be
measured. The device selects AC or DC automatically according to
which measured value is larger. The AC or DC symbol displays blinking
in auto detect mode.
To select AC, DC or AC+DC manually, press the
them. The symbol corresponding to the choice will then display.
The measured value is displayed:
In DC:
Display
1st row
2nd row
3rd row
28
.
Quantity
Voltage V
RMS
DC RIPPLE in %
DC voltage component, V
DC
Clamp-On Meter Model 607 - User Manual
button to toggle between