Backlighting; Standby Mode; Taking Measurements; Voltage Measurement - AEMC 6536 User Manual

2.1.5 Backlighting



2.1.6 Standby Mode

After 5 minutes of operation with no user activity, the instrument automatically
switches to standby mode. To restore normal operation, simply press any button.
The instrument returns to the state it was in prior to entering standby mode, with
no loss of information (value of the last measurement, compensation of the leads,
∆REL, timed mode, alarm, etc.).
Automatic switching to standby mode is disabled during:
■ insulation measurements in
■ continuity measurements, for as long as measurements are made.
Automatic switching to standby is disabled via the SET-UP button (see § 2.1.1).

2.2 taking Measurements

2.2.1 Voltage Measurement

To ensure proper and accurate operation of the instrument, we recommend
measuring a known voltage (such as an electrical outlet) before measuring
unknown voltages.
1. Set the switch to V or MΩ VAR.
Megohmmeter Model 6536
Shop for Data Logging products online at:
Pressing the button turns ON backlighting for the LCD.
To switch it OFF, press the
backlighting goes OFF automatically at the end of one
minute.
www.
button again. Otherwise,
mode and in
DataLoggerStore
mode.
1.877.766.541
.ca
15