Resistance Measurement; Active Dc Power Measurements - AEMC 607 User Manual

5.2.11 Resistance Measurement

Measurement
Range
(1)
Specified
Measurement Range
Accuracy
Resolution
Open-circuit Voltage
Measurement
Current
(1) Above the maximum display value, the display unit indicates OL.
The - and + signs are not displayed.
Specific Specifications in MAX/MIN mode:
■ Accuracy: add 1 % R to the values of the previous table.
■ Capture of the extreme: approximately 100 ms.

5.2.12 Active DC Power Measurements

Measurement
Range
(2)
Specified
Measurement
Range
Accuracy
(3)
Resolution
(1) Display of OL or ± OL
Above 3000 kW in single-phase (1000 V x 3000 A).
(2) Any applied voltage greater than 1000 V causes the emission of an intermittent alarm beep to
report a dangerous overload.
(3) The measurement result may be affected by an instability linked to the current measurement
(approximately 0.1 A).
Example: For a power measurement made at 10 A, the instability of the measurement
will be 0.1 A/10 A or 1 %.
Clamp-On Meter Model 607- User Manual
(0.0 to
999.9)
Ω
(1 to 100) % of the
measurement range
0.1
550 µA
(0 to 9999)
W
(1 to 100) % of the
measurement range
1000 A
± (2 % R +10 cts)
(1000 to 2000) A
± (2.5 % R +10 cts)
2000 to 2500 A
DC
± (3.5 % R +10 cts)
(2500 to 3000) A
DC
± (4.5 % R +10 cts)
1 W
(1000 to
9999)
(0 to 100) % of the measurement
± (1 % R + 5 cts)
Ω
≤ 3.6 V
100 µA
(10.00 to
99.99)
kW
(0 to 100) % of the measurement range
± (2 % R +3 cts)
(1000 to 2000) A
± (2.5 % R +3 cts)
(2000 to 2500) A
± (3.5 % R +3 cts)
(2500 to 3000) A
± (4.5 % R +3 cts)
10 W
(10.00 to
99.99)
Ω
range
Ω
1
10 µA
(100.0 to
999.9)
kW
1000 A
:
DC
:
DC
100 W
Ω
k
Ω
10
(1000 to
3000)
kW
(1)
1000 W
57